BIN Shellac-Base Interior and Spot Exterior Primer, Flat White, 1 gal Bucket/Pail, 2/Carton
Login to View Prices
Looking for a “silver bullet” primer that covers everything? Choose the primer that contractors have kept in their vans for decades: Zinsser BIN Shellac-Base Primer. As the original shellac primer/sealer, nearly nothing is better at permanently covering bleeding wood knots, sap streaks and graffiti as well as water, grease, rust, smoke and many other types of stains. This pioneering primer/sealer permanently blocks most every kind of odor, too. When it comes to preparing indoor surfaces for topcoats while sealing nearly any porous surface, especially where excellent enamel holdout is required, few primers match BIN Shellac-Base Primer. It can even be applied when temperatures dip below freezing. Though it’s designed specifically for indoor application to ceilings, walls, doors, trim, cabinets, furniture and more, this versatile product is also capable of spot priming certain exterior surfaces (see product packaging for more details).
Additional information
| Weight | 21.5940 lbs |
|---|---|
| Dimensions | 14.00 × 7.00 × 8.00 in |
| Volume Capacity | 1 gal |
| Diluent/Solvent Ingredient( | Water |
| Global Product Type | Building/Construction Paints & Primers |
| Packaging Type | Bucket/Pail |
| Application Method | Roller |
| Binder/Vehicle Ingredient(s | Shellac |
| Product Compostability Indi | N |
| Product Biodegradability in | 0 |
| Color Family | White |
| Ship Class Code | A |
| Recommended Level of Ventil | Moderate |
| Age Recommendation | Ages 16 and Up |
| Applicable Surface Material | Wood |
| Intended Application Enviro | Interior/Exterior |
| Finish/Sheen | Flat |
| Footnote 2 | Recommended Wet Film Thickness to Achieve DFT: 2.5 to 3 mils |
| Footnote 1 | Recommended Dry Film Thickness (DFT) Per Coat: 0.75 to 0.9 mils |
| Paint Sub-Category | Primer, Shellac-Based |
| Disclaimer Statement | B-I-N Shellac-Base Primer is not recommended for whole surface exterior application or for application to floors, decks, or any surface subject to immersion or prolonged contact with water. Apply only when air, material, and surface temperatures are between 0 and 90ºF (-18 and 32ºC) and the relative humidity is below 70%. Do not apply B-I-N if surface temperature is within 15°F of the dew point. Substrate moisture should not exceed 12%. DO NOT THIN. |
| Cure/Dry-Time Range | 1-3 Days (Full Cure) |
| Maximum Coverage Area | 500 sq ft |
| Application Temperature Ran | 0º and 90ºF |
| Color(s) | White |
| Post-Consumer Recycled Cont | 0% |
| Pre-Consumer Recycled Conte | 0% |
| Total Recycled Content Perc | 0% |
| UPC | 047719009016 |
| MPN | 320991CT |
| Brand | Zinsser® |
Reviews
There are no reviews yet.