Betco® Emulsion® Pro Plus Sport Sealer & Finish, 5 Gallons Pail

EMULSION® PRO+ IS A ONE-COMPONENT, AMBERING, COMMERCIAL GRADE, SELF-LEVELLING SEALER & FINISH. THIS PRODUCT CONTAINS AN OXIDATIVE CROSSLINKING POLYURETHANE (OCP), AND IS IDEAL FOR USE IN RESIDENTIAL, COMMERCIAL, OR SPORT WOOD FLOORING APPLICATIONS. FEATURES:

ONE-COMPONENT, EXTENDED POT LIFE AMBERING, ENHANCES BEAUTY OF WOOD LOW VOC, LOW ODOR IS NOT OMU | NON-FLAMMABLE VOC COMPLIANT, COMPLIANT IN US & CANADA FOR USE ON GYMNASIUM AND OTHER WOOD FLOORS DIRECTIONS FOR USE:
WOOD FLOOR PREPARATION: VACUUM ALL DUST AND TACK WITH COTTON TOWEL. SEALER APPLICATION: 2 COATS MINIMUM RECOMMENDED. APPLY AT 500 – 600 SQ. FT./GAL. 120 GRIT SCREENS ARE RECOMMENDED FOR FINAL SCREENING FOR SCREENING AND RECOATING: ALWAYS CLEAN THE FLOOR PRIOR TO SCREENING. MIX SQUEAKY CLEANER (SEE PRODUCT LABEL FOR ADDITIONAL INSTRUCTIONS) AND TACK USING A CLEAN TOWEL. SCREEN USING NEW 120 OR 150 GRIT SCREENS, VACUUM AND TACK USING A WATER MOISTENED COTTON TOWEL APPLICATION: APPLY AT 600 SQ.FT./GAL. POUR FINISH INTO A CLEAN, DRY, PLASTIC POUR CAN. POUR A 4-INCH WIDE LINE OF FINISH ALONG ONE WALL, WITH THE GRAIN OF THE WOOD. WITH THE APPLICATOR AT A SLIGHT ANGLE, MOVE THE PUDDLE LINE TO THE OPPOSITE WALL, ALWAYS MAINTAINING A WET EDGE. AT THE END OF EACH PASS, MAKE A SMOOTH TURN WITH THE APPLICATOR AND SQUEEZE OUT EXCESS FINISH WITH THE GRAIN NEXT TO THE PUDDLE LINE. ALLOW TO DRY THOROUGHLY (MINIMUM 2 – 3 HOURS BETWEEN COATS DEPENDING ON CONDITIONS WITH A MAXIMUM OF 24 HOURS). ABRADE BETWEEN COATS IF 24 HOURS HAS ELAPSED WITH A MAROON TOP SCRUB PAD OR 150 GRIT SCREEN. APPLY 1 – 2 COATS MINIMUM. ALLOW LIGHT TRAFFIC AFTER 24 HOURS, HOWEVER, IT IS SUSCEPTIBLE TO SCUFFING AND MARRING NOTE: ALLOW ADEQUATE VENTILATION. CIRCULATE AIR ABOVE THE FLOOR. ALLOW ADEQUATE AIRFLOW FOR AT LEAST 24 HOURS AFTER FINAL COAT IS APPLIED. USE AIR CONDITIONERS AND EXHAUST F